## Can you run a 1 ohm amp at 2 ohms?

Table of Contents

An amp that is 1 ohm stable is usually a bridge amp that is 2 ohm stable for each channel. It would be best to drive two subs with each channel to realise the capabilities of the amp. Two subs will give more bass than one and will operate in a more linear area of the voice coils for a given decibel volume.

### Is a 1 ohm amp good?

What Amps Are Best For Subs? I find that 1 ohm-stable amplifiers are generally the best for high-powered subs since they provide the most power. However, if you have a sub with a lower RMS, you may also go with a 2-ohm or 4-ohm amplifier that can output at least 150 watts RMS.

**What ohm is best for amplifier?**

Impedance: It’s All in the Ohms Audio amplifiers are commonly designed to work with 4, 8 or 16 ohms of resistance, and optimum system performance can be obtained if the total ohm load of the loudspeakers is exactly correct for the amplifier.

**What hits harder 1ohm or 4ohm?**

A subwoofer with a 1 ohm impedance load produces less resistance than a similar subwoofer rated at 4 ohms, given the same input wattage. Consequently, a subwoofer rated at 1 ohm (low resistance) will hit louder than its 4 ohms counterpart because it is easier for the amplifier to push that reduced load.

## What happens when you run a 2 ohm amp at 1 ohm?

If the amp is rated at 2ohm stable and you connect it to a 1ohm load and crank up the volume, then YES, you will damage the amp eventually. If it is a DVC sub you may be able to wire it to where it will be an acceptable ohm load for the amp.

### How do I know if my amp is 1 ohm stable?

1 Ohm Stable Amplifiers. The first is 1 ohm stability. These are amplifers that have been rated to supply power all the way down at 1 ohm (or sometimes lower!). The easiest way to tell if an amplifier is 1 ohm stable is to look at the manufactuer’s specifications.

**What happens if you run a 2 ohm stable amp at 1 ohm?**

**Can Kicker amps run at 1 ohm?**

Kicker Amplifiers Kicker’s current amplifier series offer a 400, 800, and 1200 Watt amplifier in its CX Series for mono amplifiers with 1 ohm stability. The Kicker CX Series features 1 ohm stability in the 400, 800, and 1200 Watt power ranges.

## What sounds better 1ohm or 4ohm?

The reason is that at 1 ohm you’re straining the power supply and output devices of the amplifier. The effective headroom of the amplifier is cut down by a large amount in comparison to 4 ohm, the damping factor is substantially lower, the distortion is much higher, and the amplifier will run much hotter.