How do I fix misfeed Ricoh printer?

Table of Contents

Pull out the paper tray until it stops, and then remove misfed paper. Carefully slide the paper tray into the printer until it stops. Open the front cover by pushing the front cover release button, and then close it to reset the misfeed condition.

What is tray 1 in Ricoh printer?

The default setting is [Tray 1]. Specify the size of the paper in the bypass tray when printing data from the computer. You can specify a custom size of between 3.55 – 12.00 in (90.0 – 305.0 mm) vertically, and between 5.83 – 23.62 in (148.0 – 600.0 mm) horizontally.

How do I select the tray on my Ricoh printer?

To configure Paper Tray Settings, Select User tools/ Counter.
Select Tray Paper Settings.
There are three screens, which allow you to configure your paper tray setting depending on your needs.
Select Tray 1 and then Select OK.
Select Tray Paper Size: Tray 1.

What does misfeed tray 1 mean?

“Remove Misfeed Tray 1” appears when a paper jam has occurred in Tray 1. Open the front cover and remove the paper.

What is misfeed tray?

“Internal Misfeed” , “Misfeed: Tray 1” , “Misfeed: Tray 2” , or “Misfd: Stnd Tray” appears when a paper jam has occurred in the fusing unit, tray 1, or tray 2. Use the following procedure to remove paper that has become jammed inside the printer or in the paper feed area.

How do you load paper into tray 1?

To load paper in Tray 1:

Pull out and remove the tray.
Move out the length and width guides.
Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
Load the paper into the tray, then adjust the paper guides in the tray to match the paper size.

How do I change my printer from tray 1 to tray 2?

Right-click your product, and then select Printing Preferences. From the Printing Preferences menu, select Paper/Quality. From the Paper Source drop-down menu, select Tray 2.

How do I select a different tray for printing?

To specify a tray within MS Word the user must:

Click File and then Print.
In the Print Dialogue click Page Setup.
In the Page Setup window click on the Paper tab.
Select the intended tray for the first page and remaining pages.
Make sure that the same tray is selected in the Driver Properties.

What is paper tray problem?

If your paper trays are misfiring or malfunctioning, your printer is unable to properly receive the paper to complete your printing tasks.

What causes paper misfeed?

Misfeeds occur frequently. The number of sheets loaded exceeds the capacity of the printer. Load paper only as high as the upper limit markings on the side fences of the paper tray, or the markings on the paper guides of the bypass tray. Misfeeds occur frequently.