How do I reset my 976LM?

How do I reset my 976LM?

1. Press and release the “learn” button on motor. unit. The learn indicator light will glow. steadily for 30 seconds.
2. Within 30 seconds, enter a four digit personal. identification number (PIN) of your choice on. the keypad. Then press and hold the ENTER. button.
3. Continue holding the ENTER and LIGHT.

How do I reset my Chamberlain keypad without the code?

Here is How to Reset Chamberlain Garage Door Keypad Without Enter Button. Remove the cover from the garage door openers remote control to reveal the switches within. Press the * and # pound button at a same time followed by red light blinking a couple of times. Once the blinking light stop the password has been reset.

How do I program my 976LM keypad?

Quick Guide to Programming the Liftmaster 976LM

1. Press the “learn” button on the motor unit. The indicator light will turn on for 30 seconds.
2. Within 30 seconds, enter a four digit personal identification number (PIN) of your choice on the keypad.
3. Let go of the button when the motor light blinks.

How do I reset my Chamberlain garage door keypad?

Programming a Keypad PIN

1. Be sure to clear the garage door area of any obstructions.
2. Locate the LEARN button on the door control.
3. Press the LEARN button twice. The LED will flash.
4. Enter a 4-digit PIN of your choice on the keypad, and press ENTER.
5. The opener lights will blink, indicating the PIN programming is complete.

How do I change the code on my garage door opener without the code?

After locating learn knob, press and hold it until the lights halt illuminating. Pressing and holding the learn button will erase the old password. Now, the system will work without any password or code.

What remotes are compatible with liftmaster?

Green LEARN Button

Compatible Remote Controls	Compatible Keyless Entry
81LM (One-Button Remote)	66LM 877MAX 878MAX 878MAXMC
82LM (Two-Button Remote)
83LM (Three-Button Remote)
84LM (Four-Button Remote)