How do I use Synology ups?
Table of Contents
Connect the UPS device to a USB port of the Synology NAS. On the UPS tab, tick the Enable UPS support checkbox. Select when the Synology NAS should enter Safe Mode upon power failure. If you wish to shut down the UPS when the system enters Safe Mode, tick Shut down UPS when the system enters Safe Mode.
Does Synology NAS need UPS?
You need UPS protection for your router, switches and your desktop computer, if you’re using one. If you can’t connect them to the same UPS as the DiskStation, you’ll need separate ones. Due to its higher power requirements, it’s probably best to have a dedicated UPS for your desktop PC too.
What UPS does Synology use?
UPS
| Brand | Model Number | Tested by |
|---|---|---|
| Show All —— APC CyberPower Delta EATON FT UPS INFOSEC Kehua MGE NEXT Nitram Omron Online-USV PowerShield PowerWalker Powercom Santak | Show All —— Synology Vendor Recommended | |
| APC | AP9640 Network Management Card | Synology |
| APC | BE350U | Vendor Recommended |
| APC | BE400G-BR | Vendor Recommended |
How much power does a Synology use?
According to Synology’s website, the power consumption of the device is 17.23 W in access mode and 5.4 W in hibernation mode.
Does Synology need a UPS?
Should I use UPS for NAS?
The NAS only has to be in the process of writing data to the disk at the very moment a power outage occurs; and this has potential to immediately corrupt the entire drive. So, the general consensus is to use a UPS with all NAS devices.
Does Synology NAS use a lot of power?
Does a NAS use a lot of power?
In normal steady state, power consumption generally hovers around 55 to 58 Watts. The lowest the power drops to is 51.1 Watts. The highest to climbs up to is 75.1 Watts. To get a sensible average reading, I measured energy consumption over one hour.
How important is a UPS for NAS?
Mid range UPS devices can provide higher CHARGE TIMES, more features and functionality like Network alerts, internet alerts over SMS, E-mail, LCD display, USB connectivity (for maintenance as well as be able to save or shut down some NAS or PC machines for you in the event of power failure – saving you from needed to …
How many watts does Synology NAS use?
Basically, a Synology NAS with two discs consumes approximately 30 W/watts, the energy usage of a modern led light bulb. It’s possible to reduce power consumption by 1 watt through the Control Panel by completely turning off the LED’s on your Synology NAS.