How much space do you need around a drop in tub?
At least 6 inches on each side of the tub is recommended; take the thickness of the surround and deck material (tile, granite, etc.)
How much space do you need around a tub surround?
However, as a general rule you should include at least 6 inches of space along both the front and the back of the tub, so that the deck has a full foot of open space beyond the facial dimensions of the tub.
How do you measure a drop in tub?
Using a power tape, measure the edge of the tub from one end to another for height and width. To measure the height of the bathtub, take measurement from the floor to the top. If you don’t get a round figure, take a number that is close to the standard size, that is listed below.
How do you frame around a drop in tub?
Drop in tub surround with full access
- Step 1: Frame out surround.
- Step 2: Install proper substrate on framing.
- Step 3: Install finished surround material.
- Step 4: Finish top deck.
- Step 5: Place tub and Shim/level.
- Step 6: Secure the bottom of the tub.
- Step 7: Install drain/overflow.
- Step 8: Install high flow tub filler.
How much space should be around a freestanding tub?
A freestanding bath should have no less than 6 inches of space surrounding all angles of the tub. By following that guideline, you can ensure your freestanding bath has a comfortable access point, and won’t appear cramped in your bathroom regardless of its design.
How wide is a tub surround?
Typical pre-constructed surrounds have a length of 60 inches, a height of 32 inches and a width of 32 inches-this generally can fit a small to moderate sized bathtub. This extends to higher or larger sizes which come in with a length of 60 inches, a height of 72 inches and a width of 60 inches.
What is difference between alcove and drop-in tub?
Drop-in bathtubs are installed anywhere a carved out deck or structure is implemented, often times in the center of the bathroom. Alcove bathtubs on the other hand, are installed in a recess, against the wall or an alcove.