How do I change GloBrite color?
Table of Contents
The IntelliBrite® Controller provides complete control of your GloBrite color lights. It’s easy to select a lighting feature, just dial in any one of the pre-programmed color light shows or fixed colors. Using the Hold and Recall buttons you can also create endless unique lighting effects.
How many watts is a Pentair GloBrite light?
GloBrite White LED Lights use only 15 watts to deliver the equivalent of 190 watts of incandescent light. And, savings add up with extended service life.
What is a Nicheless pool light?
Nicheless lights do not use a wet niche and; therefore, do not require the added engineering detail, steel, or gunite that is typically used to install standard pool lights. For example, some manufacturers offer lighting products that can be installed in a standard 38.1 mm (1.5 in.)
How do you add lights to an existing pool?
For those who truly want to light up the pool, you will need to set up a power source. We recommend a GFCI outlet, and you can mount the light transformer next to the outlet and plug it in. If that’s not possible, you’ll need to install a waterproof junction box on an existing power line.
Why won’t my pool lights work?
If the breaker that your pool light is on has been tripped, unplug whatever you just turned on or plugged in and then reset the breaker by turning it all the way off and then back on again. If that doesn’t work, you may have a bad breaker. If you have any GFCI outlets on your pool light circuit, try resetting them.
How do I sync my Hayward LED pool light?
To re-synchronize your lights, turn the switch on, then back off, then wait between 11 and 14 seconds and turn the switch back on. When the lights come back on, they should enter program #1, and be synchronized.
How long should an LED pool light last?
Your pool lighting should give you few problems overall. Most incandescent bulbs will burn for 1,000 hours before bulb replacement is necessary. LED bulbs can burn for 25 years or more (or so they tell us).
How many lights should I put in my pool?
How many lights do I need? The amount of lights you need depends on the size of your pool. For larger pools, two is the minimum recommendation, with three lights being a common amount. Pools smaller than 30′ can be illuminated with a single light, but two lights may be preferable.
Why does my LED pool light flicker?
Dead Bulb. If your pool light bulb is flickering or turned off and the housing is still dry, it may be that the bulb just needs replacing. Be careful, though, because if the bulb isn’t lasting as long as it should that is an indicator of a much worse problem such as a power surge or some faulty wiring somewhere.
Do pool lights burn out?
Just like any light, the bulb can burn out and will need to be replaced. There is no need to lower the water level in your pool to replace the burned-out bulb. Instead, you can remove the light housing from the side of the pool, pull the fixture up onto the side of the pool, and change the light bulb there.