How do you put a Cisco phone on silent?
To mute the phone microphone, speaker, or headset microphone, press the Mute button on the phone. The button will illuminate red. Press the Mute button again to unmute. If no audio device is ON, pressing the Mute key has no effect.
How do I turn off Do Not Disturb on my Cisco phone?
- Press the Setup button and select User Preferences.
- Select Call Preferences.
- Scroll to Do Not Disturb.
- Press the Right Arrow key to turn Do Not Disturb ON or OFF.
- Press Set. System Status.
How do I turn off night calling on my Cisco phone?
How do I turn Night Service on or off?
- Open and log into the web interface.
- Select PBX / System Settings to open the System Settings menu.
- Select Enabled or Disabled from the Night Service dropdown list. The default is Disabled.
- Select Submit.
How do I setup my Cisco IP phone SPA508G?
To Set Up a Cisco SPA508G:
- Plug in the phone to both power and Internet.
- Press 9 on the keypad.
- Click HERE to open the provisioning site in a web browser (Internet Explorer, Firefox, Chrome, etc.).
- Select the Cisco SPA508G phone model from the list toward the top of the page.
How do I make my Cisco phone ring?
Step 2 Select Settings > Ringtone. Step 3 Select a line. Scroll through the list of ringtones and press Play to hear a sample. Press Set to use the ringtone.
How do I change my Ringtone on Cisco Jabber?
You can choose a different ringtone for your Cisco Jabber calls. Go to Settings > Options > Notifications . In the Ringtone section, choose a ringtone. Select Apply .
How do I turn off Do Not Disturb on Cisco phone 7941?
- Mute a Call. Your system administrator enables DND for your phone.
- Disturb. 2. “ Do Not Disturb” displays. on the phone.
- To turn off: Press DND or Do Not. Disturb.
How do I block a number on my Cisco IP Phone?
Block Spam Callers
- Press the Cog button (looks like a little gear) on your Cisco phone.
- Select “Recents” from application list.
- Scroll down the list of calls until the desired number is highlighted.
- After highlighting the number press the 3-dot button (…)
- Press the button under “Mark Spam” to select that option.
How do I change the number of rings on my Cisco IP phone?
Select Cisco CallManager from the list and then choose the Cisco CallManager service from the list on the left. The parameter that needs to be changed is titled Forward No Answer Timeout. By default, it has a value of 12 seconds. A typical ring cycle is approximately 4 seconds.
How do I change my Cisco phone settings?
Use Cisco Unified CallManager Administration to modify > Device > Phone > Phone Configuration. URL of the server from which the phone obtains message services. Use Cisco Unified CallManager Administration to modify > Device > Phone > Phone Configuration. URL of the help text that appears on the phone.