What bits come with X-Carve?
Planing bit. ¼” high-speed steel 2 flute upcut spiral bit. ¼” shank V-bit.
Can the X-Carve do 3D carving?
X-Carve is a 3D carving machine that can carve designs out of a variety of materials: wood, plastics (e.g. acrylic and HDPE) and other materials.
How deep can the X-Carve cut?
Machine Specs The X-Carve has a workspace of 39.37” x 39.37” or 1000mm2. The Maximum size of material that can be cut is 800mm x 800mm x 65mm; however, our clamps will only allow material up to 2” thick. Most bits will not be able to reach the full 2”, so keep that in mind when choosing material.
What’s the difference between X-Carve and X-Carve Pro?
The X-Carve and X-Carve Pro are two very different pieces of hardware. The X-Carve uses a router and belt drive system, while the X-Carve Pro has an included spindle and uses ball screws and linear guides.
What is a fishtail bit used for?
Ideal for carving plastics These fishtail bits are great for fine detail and inlays. The upcut tip design creates a cleaner edge on the backside of the sheet when cutting through materials.
What is V carving?
V-carving is a method of cutting that leverages a v-shaped bit to generate designs with varied widths. The shape of the v-bit creates carves that are narrow at the tip of the bit and wider at the base of the bit, opposing the use of straight-cut bits that provide a uniform cut all the way through.
How thick of material can CNC cut?
CNC laser cutting machine can cut carbon steel upto 9mm in a minute and 19 mm is the maximum limit. This can even cut stainless steel for 15mm and if you need thicker, it will need 3KW power.
How do I change the depth of cut on an easel?
You can change the Depth per pass setting under “Manual” in the Cut Settings. The number of passes your machine makes can be seen by hitting the “Simulate” button in the lower right corner of the Easel toolbar and hiding the “Material.”
What is Plunge rate?
Plunge rate is the speed at which the router bit is driven down into the material when starting a cut and will vary depending on the bit used and the material being processed. It is important not to plunge too fast as it is easy to damage the tip of the cutter during this operation.
What is a fishtail spiral bit?
How many flutes does AV bit have?
The Router Bits Are Super for Carving V Groove, CNC Lettering And Signs, And Chamfering End. 4 Flutes Designed Chamfer Bits to make Cutting More Efficiently And Clean Surface. Solid Carbide Material With Tiain Coated, Applicable for Hard wood, Plywood, Soft wood, OAK, MDF And Metals Under HRC 55.