What is a concrete parge coat?
A parge coat is a thin coat of a cementitious or polymeric mortar applied to concrete or masonry for refinement of the surface. Pargeting is a more involved process, involving designs in relief created in the surface. Parging is usually applied with a trowel and pressed into the existing surface.
What is a parge coat used for?
A parge coat can reduce air leakage through cracks, joints and porous wall constructions and so reduce energy consumption and improve comfort and acoustic performance. It can also be used to prepare a surface for a topcoat.
What is Parge coating made of?
Parging is made from a blend of lime, water, and cement. Adding the proper types and amounts for blending can be challenging, as it is a very tricky mixture to master.
Is parging the same as cement?
The process of parging generally refers to the application of a cement coating, which is applied over a wall surface, such as over a foundation, or exterior wall. Most common is the process of parging over a masonry foundation wall or a masonry chimney.
What can I use for a parge coat?
For a quality parging mix its best to use a mix of about about 3 parts sand to at least 1 part portland cement. You can add 1/4 to 1/2 part lime powder to make it a little easier to spread or apply. This is mixed with enough water to get a nice consistency, not too runny.
What can I use instead of parging?
You can use acrylic stucco as a viable option for parging over concrete foundation walls. However, not all concrete foundation walls can effectively be parged using acrylic stucco. This kind of parging system comprises the last three layers Exterior Insulation and Finish Systems, commonly referred to as EIFS.
Is parging the same as stucco?
Parging is a construction technique used to finish the surface of a masonry wall. It is similar to stucco, but uses a masonry-based mortar rather than a traditional stucco mixture. This material can be installed over new or existing walls, and it is used in both residential and commercial applications.
Can quikrete be used for parging?
QUIKRETE® Water Resistant Parging Mix (115525) is a Masonry coating and patching of concrete walls for cosmetic. Used For: Concrete block.
Why does parging fall off?
A sudden drop in temperature is bad news for a freshly applied coat of parging. Water soaks into the parging, then expands as it freezes, cracking the surface and breaking off chunks. If the ambient temperature is too cold -the Parging freezes.
Can I use mortar mix for parging?
Type S Masonry mortar is recommended for use in all masonry be- low grade as well as in exterior load bearing walls requiring high strength. Type N Masonry Cement or Type S Masonry Cement can also be used in parging and stucco work.
Can you DIY parging?
Mike Holmes answered, “parging can be DIY, as long as you do it right. Start by chipping away at the cracked/loose concrete with a concrete chisel. Then brush the area with a wire brush-that will get rid of any loose bits, dust and debris.