What is Autostar Suite?
An AutoStar Suite Software CD-ROM is included as standard equipment with each LXD-75, LX90, and LX200 telescope. This software package integrates the telescope with a Windows-based PC or laptop computer for an enhanced range of performance features.
What is Meade Autostar Suite?
Meade 04520 Overview Ushering in a new era in astronomical imaging & telescope control, Meade’s Autostar Suite is a gargantuan leap forward in guiding your Autostar II or Autostar #497 equipped telescopes.
How do I reset my Meade Autostar controller?
*Problem* If Autostar does not display messages, turn the power off and then back on. Also, check the batteries or other power source. If the beep sounded and the screen is difficult to read, press MODE (3) and Autostar resets the screen to factory settings.
How does a Meade telescope work?
Meade refractor telescopes employ a two-lens optical design to capture the faint light reflected by these objects. When used with a set of magnifying eyepieces and a sturdy tripod and mount, a Meade refractor telescope will provide high-resolution views of objects normally invisible to the naked eye.
How do you control a telescope with Stellarium?
To activate the Telescope Control plug-in:
- open the Configuration window (press F2);
- go to the Plugin tab;
- select “Telescope Control” from the list;
- check the “Load at startup” option;
- exist Stellarium.
What is Meade AudioStar?
The Meade AudioStar features audio files and an internal speaker. This computerized celestial object locating system plugs into the telescope’s handbox port allowing a quick telescope alignment. Once aligned with the sky the AudioStar is ready to take you to any object in the over 30,000 object database.
How do I reset my Meade ETX 60at?
As to resetting the Autostar, there is a RESET menu item in the SETUP menu; just scroll through the menu items until you see RESET and then press ENTER.
Why can’t I see out of my Meade telescope?
If you are unable to find objects while using your telescope, you will need to make sure the finderscope is aligned with the telescope. The finderscope is the small scope attached near the rear of the telescope just above the eyepiece holder. This is best done when the scope is first set up.
How do you connect Stellarium to astrophotography tool?
Go to the Tools tab and then select “APT Settings.” From there go to “Planetarium” and make sure the settings in there correspond to the ones you entered into the “Remote Control” in Stellarium, as I’ve done here.